Leading 10 usual forklift accidents ， forklift procedure need to take notice of these issues ！.
Leading 10 usual forklift accidents ， forklift procedure need to take notice of these issues ！.
Blog Article
Don't ignore the forklift at the workplace. If the procedure is bad, there will be major crashes in mins, and there are numerous accidents including forklifts.
Instance 1: The forklift freight obstructed the chauffeur's view, and the person ahead can not be located, resulting in a moving accident.
Instance 2: In order to maintain the balance of the forklift when raising heavy goods, the workers used their body weight as the counterweight, which almost triggered casualties.
Situation 3: The size of the forklift freight exceeds the allowable size of the course and holds on the roadside shelf, which practically causes an accident.
Instance 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift vehicle driver did not discover the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift raises the workers illegally, the forklift vehicle driver does not put on the safety belt, the forklift lifter drops and the motorist is crushed when the forklift surrender.
Situation 7: The forklift chauffeur did not put on a seat belt and dropped from the lorry when it surrendered and was squashed.
Forklift procedure must pay attention to these issues ：.
Begin.
1. Prior to beginning, observe the surroundings, and after verifying that there are no barriers that hinder the security of driving, honk the horn first and afterwards begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) scale should be secure prior to beginning.
3. When the forklift begins with a load, the vehicle driver must initially validate that the load is secure and reputable.
4. The start needs to be slow and stable.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast needs to be tilted backward. .
2. Do not lift the fork too high when driving. When going into and leaving the task website or while driving, take care that there will be no challenges in the sky. When the tons is taking a trip, the fork has to not be elevated expensive, which will certainly affect the security of the forklift. .
3. After unloading, the fork needs to be decreased to the normal driving setting before driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal needs to be issued initially. High-speed sharp turns are prohibited. High-speed sharp turns will create the car to shed lateral security and tip over. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is forbidden to brake unexpectedly while driving with tons unless there are special circumstances.
6. When the forklift is running, it needs to follow the website traffic rules in the factory and need to maintain a certain safety and security range from the lorry ahead. .
7. When the forklift is running, the lots must be in the lowest position that does not impede the driving, and the gantry should be correctly tilted back. The tons shall not be raised other than when stacking or loading. .
8. The height of the lots must not block the driver's view. In special scenarios, when the product influences the forward vision, drive at a reduced rate when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it has to drive securely at a low rate when going into the manufacturing workshop area. .
11. When the forklift is lifted, lifted or driven, it is restricted for employees to base on the fork to hold things and play a balancing role. .
12. If troubles are located, they will be fixed and reported in a prompt way, and they will never ever run with illnesses or conceal them.
packing and discharging.
1. When fork-loading products, the range between the two forks ought to be adjusted as required to make the tons of the two forks balanced and not manipulated, and one side of the item must protest the rack. .
2. It is prohibited to collaborate with a solitary fork or make use of a fork top or draw. In unique scenarios, safety and security indication need to be established to remind bordering pedestrians. .
3. In the process of filling and discharging products, the forklift needs to be braked with the brake. .
4. The rate of the car ought to be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the lots, and it must be noted that the fork pointer should not touch various other products or objects. The tons ought to be supported with minimal back tilt of the gantry to make sure that the load does not glide backwards. The mast can be tilted forward slightly when the load is decreased to allow for very easy positioning of the tons and extraction of the forks. .
6. It is restricted to fork items at broadband and ram difficult things with the fork head. .
7. When the forklift is functioning, it is forbidden for individuals to loaf the fork, so regarding prevent the collapse of the goods and injure people. .
8. Overwhelming is banned, and it is prohibited to make use of forks to raise workers to take part in high-altitude operations to avoid high-altitude dropping accidents. .
9. It is not permitted to utilize the brake inertia to slide, place, round or roll things. .
10. It is not allowed to use forks to select, turn pallet discharge.
Leaving .
1. It is restricted to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you have to discharge the goods or reduced the fork structure.
2. Draw the emergency brake take care of to dead or depress the hand brake button.
3. The engine is shut off and the power is removed. (Except for special conditions, such as the chauffeur does not leave the car's line of sight and does not go beyond 1 min).
4. Remove the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubing oil and cooling water should be added.
2. Examine the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are complete and effective.
4. During the procedure of the forklift, inspect whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leak should likewise be examined and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You should inspect before leaving the car;.
2. When you experience someone in front of you during driving, you must send out a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be too sharp to avoid the propensity of " cost-free switching";.
6. Adding and down the incline must be sluggish and uniform, and no switching on the slope is enabled.
7. Do not drive throughout the gradient. When the gradient is higher than 10%, the car ought to be driven backwards when going downhill;.
8. When the forklift personnel carry the goods and move on, if they experience big or heavy goods and go to the driver's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not enabled.
2. It is not enabled to Electric Forklift Truck for Warehouse lift the goods for cross country driving.
3. It is not enabled to get the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not permitted to use inertia pressure to get the goods.
6. It is not allowed to use stopping pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring people to service the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Auto parking is not permitted under the list below problems.
1. Curves, narrow roadways, train crossings;.
2. Areas with a longitudinal incline higher than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with Electric Forklift Truck for Warehouse the exact same length as the challenge should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844